{"title":"Street Ride parts","description":"\u003cp\u003eThe Street Ride range. Parts we design and develop ourselves in our workshop in Brussels, then test on our own scooters before offering them to you.\u003c\/p\u003e","products":[{"product_id":"pattes-de-deport-pour-freins-hydrauliques-ninebot-max-g3-disque-140mm-1-piece","title":"Offset brackets for semi-hydraulic and hydraulic brakes - Ninebot Max G3 - 140 mm disc","description":"\u003ch3\u003eOffset brackets for hydraulic brakes, Ninebot Max G3\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAlso available in \u003ca href=\"\/en\/products\/pattes-de-deport-rouge-freins-hydrauliques-ninebot-max-g3-disque-140mm\"\u003ered\u003c\/a\u003e and in \u003ca href=\"\/en\/products\/pattes-de-deport-rose-freins-hydrauliques-ninebot-max-g3-disque-140mm\"\u003epink (limited edition, pre-order)\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you find the original braking on your Ninebot Max G3 a little weak? We have been there too. That is exactly why we made these offset brackets, designed and developed in our workshop in Brussels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitching to hydraulic brakes, finally possible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese brackets let you fit a hydraulic brake calliper to your Ninebot Max G3, at the front as well as at the rear. No more original brake that shows its limits as soon as the pace picks up: you get powerful, progressive and consistent braking, even in the rain or downhill.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese brackets are designed for 140 mm discs only, no more, no less. They have been tested and approved with NUTT hydraulic callipers, in both the 2-piston and 4-piston versions, and with Xtech callipers. If you are unsure about your set-up, contact us before ordering and we will check it together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing that does not cut corners\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach bracket is CNC machined from solid 6061 aluminium, an alloy known for its excellent stiffness-to-weight ratio, the same one used in aerospace and high-end cycling. The black anodising protects the part from corrosion and everyday spray, while giving it a clean, durable finish. The SR logo is laser engraved directly into the metal: it will never wear off. It is our signature, and if it comes from Street Ride, it has been tested on our own scooters before reaching you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose our brackets?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined 6061 aluminium: strength and machining precision\u003c\/li\u003e\n\u003cli\u003eBlack anodising: protection against corrosion and a finish that lasts\u003c\/li\u003e\n\u003cli\u003eCompatible with 140 mm discs, approved with NUTT 2- and 4-piston callipers and Xtech\u003c\/li\u003e\n\u003cli\u003ePrecise fitting: the holes are exactly where they should be, no makeshift spacers or bodging\u003c\/li\u003e\n\u003cli\u003eMaximum stiffness: no flex under braking, all the calliper's power goes into the disc\u003c\/li\u003e\n\u003cli\u003eLaser-engraved SR logo: permanent, a mark of authenticity\u003c\/li\u003e\n\u003cli\u003eDesigned, tested and approved in Belgium by riders who ride a G3 every day\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe offset bracket(s), ready to fit. Bolts and calliper not included.\u003c\/p\u003e\n\u003cp\u003eA question about compatibility with your calliper, or want the kit fitted directly at the workshop? Come and see us in Etterbeek or contact us, we will be happy to advise you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitting video\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FMBrVnwujRQ\" title=\"Fitting the Street Ride offset brackets - Ninebot Max G3\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Street Ride","offers":[{"title":"Offset brackets X1","offer_id":63862644113785,"sku":"SR-NBG3-ADHY","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Offset brackets X2","offer_id":63862644146553,"sku":"SR-NBG3-ADHY-2","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Offset brackets X2 + Hall sensor X2","offer_id":63863245930873,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Offset brackets X2 + Hall sensor X2 + Brake disc - 140mm 2.3 mm X2","offer_id":63863245963641,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Offset brackets X2 + Hall sensor X2 + Brake disc - 140mm 2.3 mm X2 + Hydraulic brake kit - 4 pistons - Y5 front L rear L [NUTT]","offer_id":63863245996409,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/WhatsAppImage2026-06-12at14.38.16_3_-Photoroom.jpg?v=1781270133"},{"product_id":"capteur-hall-pour-leviers-de-frein-nutt-ninebot-zt3-max-g3-gt3","title":"Hall sensor for NUTT brake levers - Ninebot Max G3","description":"\u003cp\u003e\u003cstrong\u003eHall sensor for NUTT brake levers, Ninebot Max G3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWant to switch to NUTT hydraulic brakes on your Ninebot, but the original lever does not send the right signal to your scooter? We have solved that. This Hall sensor, designed and assembled in our workshop in Brussels, bridges your NUTT levers and the Ninebot electronics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe right signal, at last\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNUTT hydraulic brakes come with a 2-wire sensor as standard, which does not speak the same language as your Ninebot. Our Hall sensor replaces this with a 3-wire output, exactly what your scooter's controller expects. The result: the motor cut-off when braking works perfectly, with no bodging and no error message.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis sensor is designed for NUTT hydraulic brake levers, in both the 2-piston and 4-piston versions. It makes these brakes compatible with the following model:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNinebot Max G3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCareful manufacturing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach sensor is assembled by hand and tested before dispatch. The sensor mount fits neatly on the body of the NUTT lever, the wiring is sheathed to withstand vibration and spray, and the connector is the right format for direct plug-in, with no cutting or soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose our sensor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-wire to 3-wire conversion: the Hall signal your Ninebot really expects\u003c\/li\u003e\n\u003cli\u003eCompatible with NUTT 2- and 4-piston levers\u003c\/li\u003e\n\u003cli\u003ePlug and play: direct connector, no changes to the original wiring loom\u003c\/li\u003e\n\u003cli\u003eReliable, progressive motor cut-off when braking\u003c\/li\u003e\n\u003cli\u003eDurable sheathed wiring, designed for daily use\u003c\/li\u003e\n\u003cli\u003eAssembled and tested in Belgium by Ninebot riders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe complete Hall sensor with its mount and wiring, ready to fit on your NUTT lever.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild your kit: parts sold separately\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitting your hydraulic brakes from A to Z? Find the other compatible parts, available individually:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/pattes-de-deport-pour-freins-hydrauliques-ninebot-max-g3-disque-140mm-1-piece\"\u003eOffset brackets for hydraulic brakes (140 mm disc)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/disque-de-frein-140mm-2-3mm\"\u003eBrake disc 140 mm 2.3 mm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/kit-frein-hydrauliques-4-pistons-y5-avant-l-arri-re-l-nutt\"\u003eNUTT Y5 4-piston hydraulic brake kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure about compatibility with your model or lever version? Come and see us in Etterbeek or contact us, we will check it with you before you order.\u003c\/p\u003e","brand":"Street Ride","offers":[{"title":"Hall sensor X1","offer_id":63844337353081,"sku":null,"price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Hall sensor X2","offer_id":63844337385849,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Hall sensor X2 + Offset brackets X2","offer_id":63844254548345,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Hall sensor X2 + Offset brackets X2 + Brake disc - 140mm 2.3 mm X2","offer_id":63844285579641,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Hall sensor X2 + Offset brackets X2 + Brake disc - 140mm 2.3 mm X2 + Hydraulic brake kit - 4 pistons - Y5 front L rear L [NUTT]","offer_id":63844285612409,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/WhatsApp_Image_2026-06-26_at_13.09.25_3_-Photoroom_1.png?v=1782555821"},{"product_id":"pattes-de-deport-rouge-freins-hydrauliques-ninebot-max-g3-disque-140mm","title":"Red offset brackets - semi-hydraulic and hydraulic brakes - Ninebot Max G3 - 140 mm disc","description":"\u003ch3\u003eRed Offset Brackets for Hydraulic Brakes, Ninebot Max G3\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAlso available in \u003ca href=\"\/en\/products\/pattes-de-deport-pour-freins-hydrauliques-ninebot-max-g3-disque-140mm-1-piece\"\u003eblack\u003c\/a\u003e and in \u003ca href=\"\/en\/products\/pattes-de-deport-rose-freins-hydrauliques-ninebot-max-g3-disque-140mm\"\u003epink (limited run, pre-order)\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDo you find your Ninebot Max G3's original braking a bit inadequate? We've been there too. That's precisely why we designed these offset brackets, conceived and developed in our workshop in Brussels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHydraulic brake conversion, finally possible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets allow you to mount a hydraulic brake caliper on your Ninebot Max G3, both front and rear. No more original brakes that show their limits as soon as the pace picks up: you'll enjoy powerful, progressive, and consistent braking, even in the rain or on descents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets are designed exclusively for 140 mm discs, no more, no less. They have been tested and validated with NUTT hydraulic calipers, in both 2-piston and 4-piston versions, as well as with Xtech. If you have any doubts about your configuration, contact us before ordering, and we'll check it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturing without compromise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach bracket is CNC machined from solid 6061 aluminium, an alloy renowned for its excellent stiffness-to-weight ratio, the same one found in aerospace and high-end cycling. The red anodisation protects the part from corrosion and daily splashes, while giving it a sleek and durable finish. The SR logo is laser-engraved directly into the material: it will never fade. It's our signature, and if it comes from Street Ride, it has been tested on our own machines before reaching your hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose our brackets?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCNC machined 6061 aluminium: strength and machining precision guaranteed\u003c\/li\u003e\u003cli\u003eRed anodisation: corrosion protection and impeccable finish over time\u003c\/li\u003e\u003cli\u003eCompatible with 140 mm discs, validated with NUTT 2 and 4-piston calipers, Xtech\u003c\/li\u003e\u003cli\u003ePrecise mounting: the holes align perfectly, without improvisation or makeshift washers\u003c\/li\u003e\u003cli\u003eMaximum rigidity: no flex during braking, the caliper's full power is transferred to the disc\u003c\/li\u003e\u003cli\u003eLaser-engraved SR logo: indelible, a guarantee of authenticity\u003c\/li\u003e\u003cli\u003eDesigned, tested, and validated in Belgium by riders who ride G3s every day\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe offset bracket(s), ready for mounting. Screws and caliper not included.\u003c\/p\u003e\u003cp\u003eHave a question about compatibility with your caliper or want to have the kit installed directly at the workshop? Come see us in Etterbeek or contact us; we'll be happy to advise you.\u003c\/p\u003e","brand":"Street Ride","offers":[{"title":"Pattes de déport X1","offer_id":64293674254713,"sku":"SR-NBG3-ADHY-R","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2","offer_id":64293674287481,"sku":"SR-NBG3-ADHY-R2","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2","offer_id":64293674320249,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2","offer_id":64293674353017,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2 + Kit Frein Hydrauliques - 4 Pistons - Y5 Avant L arrière L [NUTT]","offer_id":64293674385785,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/pattes-deport-rouge-ninebot-g3-11.jpg?v=1787074017"},{"product_id":"pattes-de-deport-rose-freins-hydrauliques-ninebot-max-g3-disque-140mm","title":"Pink offset brackets - semi-hydraulic and hydraulic brakes - Ninebot Max G3 - 140 mm disc","description":"\u003ch3\u003ePink Offset Brackets for Hydraulic Brakes, Ninebot Max G3\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAlso available in \u003ca href=\"\/en\/products\/pattes-de-deport-pour-freins-hydrauliques-ninebot-max-g3-disque-140mm-1-piece\"\u003eblack\u003c\/a\u003e and in \u003ca href=\"\/en\/products\/pattes-de-deport-rouge-freins-hydrauliques-ninebot-max-g3-disque-140mm\"\u003ered\u003c\/a\u003e, both in stock and shipped immediately.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDo you find your Ninebot Max G3's original braking a bit inadequate? We've been there too. That's precisely why we designed these offset brackets, conceived and developed in our workshop in Brussels. This pink anodised version is a limited run: the same part, the same standards, a finish nobody else will have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLimited run, available to pre-order\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePink is produced in very small numbers. These brackets are therefore offered as a pre-order, with shipping from 15 October 2026. You order now, your set is reserved in your name, and it ships as soon as the run arrives. If the date moves, we will tell you before it does, not after.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHydraulic brake conversion, finally possible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets allow you to mount a hydraulic brake caliper on your Ninebot Max G3, both front and rear. No more original brakes that show their limits as soon as the pace picks up: you'll enjoy powerful, progressive, and consistent braking, even in the rain or on descents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets are designed exclusively for 140 mm discs, no more, no less. They have been tested and validated with NUTT hydraulic calipers, in both 2-piston and 4-piston versions, as well as with Xtech. If you have any doubts about your configuration, contact us before ordering, and we'll check it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturing without compromise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach bracket is CNC machined from solid 6061 aluminium, an alloy renowned for its excellent stiffness-to-weight ratio, the same one found in aerospace and high-end cycling. The pink anodisation protects the part from corrosion and daily splashes, while giving it a sleek and durable finish. The SR logo is laser-engraved directly into the material: it will never fade. It's our signature, and if it comes from Street Ride, it has been tested on our own machines before reaching your hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose our brackets?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCNC machined 6061 aluminium: strength and machining precision guaranteed\u003c\/li\u003e\u003cli\u003ePink anodisation: corrosion protection and impeccable finish over time\u003c\/li\u003e\u003cli\u003eLimited series: only a handful are made, so you won't see the same ones on every street corner\u003c\/li\u003e\u003cli\u003eCompatible with 140 mm discs, validated with NUTT 2 and 4-piston calipers, Xtech\u003c\/li\u003e\u003cli\u003ePrecise mounting: the holes align perfectly, without improvisation or makeshift washers\u003c\/li\u003e\u003cli\u003eMaximum rigidity: no flex during braking, the caliper's full power is transferred to the disc\u003c\/li\u003e\u003cli\u003eLaser-engraved SR logo: indelible, a guarantee of authenticity\u003c\/li\u003e\u003cli\u003eDesigned, tested, and validated in Belgium by riders who ride G3s every day\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe offset bracket(s), ready for mounting. Screws and caliper not included.\u003c\/p\u003e\u003cp\u003eHave a question about compatibility with your caliper or want to have the kit installed directly at the workshop? Come see us in Etterbeek or contact us; we'll be happy to advise you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation video\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FMBrVnwujRQ\" title=\"Fitting the Street Ride offset brackets on a Ninebot Max G3\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Street Ride","offers":[{"title":"Pattes de déport X1","offer_id":64297591996793,"sku":"SR-NBG3-ADHY-P","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2","offer_id":64297592029561,"sku":"SR-NBG3-ADHY-P2","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2","offer_id":64297592062329,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2","offer_id":64297592095097,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2 + Kit Frein Hydrauliques - 4 Pistons - Y5 Avant L arrière L [NUTT]","offer_id":64297592127865,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/pattes-deport-rose-ninebot-g3-10.jpg?v=1787075778"},{"product_id":"pattes-de-deport-freins-hydrauliques-ninebot-gt3-e-disque-140mm","title":"Offset brackets for semi-hydraulic and hydraulic brakes - Ninebot GT3 E - 140 mm disc","description":"\u003ch3\u003eOffset Brackets for Hydraulic Brakes, Ninebot GT3 E\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAlso available in \u003ca href=\"\/en\/products\/pattes-de-deport-rouge-freins-hydrauliques-ninebot-gt3-e-disque-140mm\"\u003ered\u003c\/a\u003e, in stock and shipped immediately.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDo you find your Ninebot GT3 E's original braking a bit inadequate? We've been there too. That's precisely why we designed these offset brackets, conceived and developed in our workshop in Brussels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHydraulic brake conversion, finally possible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets allow you to mount a hydraulic brake caliper on your Ninebot GT3 E, both front and rear. No more original brakes that show their limits as soon as the pace picks up: you'll enjoy powerful, progressive, and consistent braking, even in the rain or on descents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets are designed exclusively for 140 mm discs, no more, no less. They have been tested and validated with NUTT hydraulic calipers, in both 2-piston and 4-piston versions, as well as with Xtech. If you have any doubts about your configuration, contact us before ordering, and we'll check it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturing without compromise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach bracket is CNC machined from solid 6061 aluminium, an alloy renowned for its excellent stiffness-to-weight ratio, the same one found in aerospace and high-end cycling. The black anodisation protects the part from corrosion and daily splashes, while giving it a sleek and durable finish. The SR logo is laser-engraved directly into the material: it will never fade. It's our signature, and if it comes from Street Ride, it has been tested on our own machines before reaching your hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose our brackets?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCNC machined 6061 aluminium: strength and machining precision guaranteed\u003c\/li\u003e\u003cli\u003eBlack anodisation: corrosion protection and impeccable finish over time\u003c\/li\u003e\u003cli\u003eCompatible with 140 mm discs, validated with NUTT 2 and 4-piston calipers, Xtech\u003c\/li\u003e\u003cli\u003ePrecise mounting: the holes align perfectly, without improvisation or makeshift washers\u003c\/li\u003e\u003cli\u003eMaximum rigidity: no flex during braking, the caliper's full power is transferred to the disc\u003c\/li\u003e\u003cli\u003eLaser-engraved SR logo: indelible, a guarantee of authenticity\u003c\/li\u003e\u003cli\u003eDesigned, tested, and validated in Belgium by riders who ride GT3 Es every day\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe offset bracket(s), ready for mounting. Screws and caliper not included.\u003c\/p\u003e\u003cp\u003eHave a question about compatibility with your caliper or want to have the kit installed directly at the workshop? Come see us in Etterbeek or contact us; we'll be happy to advise you.\u003c\/p\u003e","brand":"Street Ride","offers":[{"title":"Pattes de déport X1","offer_id":64302756626809,"sku":"SR-NBGT3E-ADHY","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2","offer_id":64302756659577,"sku":"SR-NBGT3E-ADHY-2","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2","offer_id":64302756692345,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2","offer_id":64302756725113,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2 + Kit Frein Hydrauliques - 4 Pistons - Y5 Avant L arrière L [NUTT]","offer_id":64302756757881,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/WhatsAppImage2026-08-19at17.16.33.jpg?v=1787152618"},{"product_id":"pattes-de-deport-rouge-freins-hydrauliques-ninebot-gt3-e-disque-140mm","title":"Red offset brackets - semi-hydraulic and hydraulic brakes - Ninebot GT3 E - 140 mm disc","description":"\u003ch3\u003eRed Offset Brackets for Hydraulic Brakes, Ninebot GT3 E\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAlso available in \u003ca href=\"\/en\/products\/pattes-de-deport-freins-hydrauliques-ninebot-gt3-e-disque-140mm\"\u003eblack\u003c\/a\u003e, in stock and shipped immediately.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDo you find your Ninebot GT3 E's original braking a bit inadequate? We've been there too. That's precisely why we designed these offset brackets, conceived and developed in our workshop in Brussels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHydraulic brake conversion, finally possible\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets allow you to mount a hydraulic brake caliper on your Ninebot GT3 E, both front and rear. No more original brakes that show their limits as soon as the pace picks up: you'll enjoy powerful, progressive, and consistent braking, even in the rain or on descents.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThese brackets are designed exclusively for 140 mm discs, no more, no less. They have been tested and validated with NUTT hydraulic calipers, in both 2-piston and 4-piston versions, as well as with Xtech. If you have any doubts about your configuration, contact us before ordering, and we'll check it together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturing without compromise\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEach bracket is CNC machined from solid 6061 aluminium, an alloy renowned for its excellent stiffness-to-weight ratio, the same one found in aerospace and high-end cycling. The red anodisation protects the part from corrosion and daily splashes, while giving it a sleek and durable finish. The SR logo is laser-engraved directly into the material: it will never fade. It's our signature, and if it comes from Street Ride, it has been tested on our own machines before reaching your hands.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy choose our brackets?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCNC machined 6061 aluminium: strength and machining precision guaranteed\u003c\/li\u003e\u003cli\u003eRed anodisation: corrosion protection and impeccable finish over time\u003c\/li\u003e\u003cli\u003eCompatible with 140 mm discs, validated with NUTT 2 and 4-piston calipers, Xtech\u003c\/li\u003e\u003cli\u003ePrecise mounting: the holes align perfectly, without improvisation or makeshift washers\u003c\/li\u003e\u003cli\u003eMaximum rigidity: no flex during braking, the caliper's full power is transferred to the disc\u003c\/li\u003e\u003cli\u003eLaser-engraved SR logo: indelible, a guarantee of authenticity\u003c\/li\u003e\u003cli\u003eDesigned, tested, and validated in Belgium by riders who ride GT3 Es every day\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eContents\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe offset bracket(s), ready for mounting. Screws and caliper not included.\u003c\/p\u003e\u003cp\u003eHave a question about compatibility with your caliper or want to have the kit installed directly at the workshop? Come see us in Etterbeek or contact us; we'll be happy to advise you.\u003c\/p\u003e","brand":"Street Ride","offers":[{"title":"Pattes de déport X1","offer_id":64303054356857,"sku":"SR-NBGT3E-ADHY-R","price":29.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2","offer_id":64303054389625,"sku":"SR-NBGT3E-ADHY-R2","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2","offer_id":64303054422393,"sku":null,"price":105.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2","offer_id":64303054455161,"sku":null,"price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Pattes de déport X2 + Capteur Hall X2 + Disque de frein - 140mm 2.3 mm X2 + Kit Frein Hydrauliques - 4 Pistons - Y5 Avant L arrière L [NUTT]","offer_id":64303054487929,"sku":null,"price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/WhatsAppImage2026-08-19at17.15.06.jpg?v=1787152542"},{"product_id":"support-telephone-aluminium-guidon","title":"Aluminium handlebar phone mount","description":"\u003cp\u003eMachined aluminium phone mount for electric scooter, bike and motorbike handlebars. Four adjustable arms grip the phone without covering the screen or buttons, and a locking screw holds the chosen position.\u003c\/p\u003e\u003cp\u003eFits phones 55 to 88 mm wide, which covers almost every smartphone on the market, case included. Attaches to a round handlebar by simple clamping.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: machined aluminium, rubber pads\u003c\/li\u003e\n\u003cli\u003ePhone width: 55 to 88 mm\u003c\/li\u003e\n\u003cli\u003eAdjustable rotation and tilt\u003c\/li\u003e\n\u003cli\u003eTwo colours: black and red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAvailable at our counter in Etterbeek, rue de Linthout 176, between Mérode and Montgomery.\u003c\/p\u003e","brand":"Street Ride","offers":[{"title":"Black","offer_id":64585883844985,"sku":"A-002G-NOIR","price":9.0,"currency_code":"EUR","in_stock":false},{"title":"Red","offer_id":64585883877753,"sku":"A-002G-ROUGE","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/files\/A-002G2.jpg?v=1789497173"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1002\/0057\/9449\/collections\/pieces-street-ride.png?v=1787161146","url":"https:\/\/www.streetride.be\/en\/collections\/pieces-street-ride.oembed","provider":"Street Ride","version":"1.0","type":"link"}